|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Mighty Mule FM132 Pushbutton Control, For: MIGHTY MULE Gate Openers
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
Wire this unit push-button directly to your gate opener for simple open/close/stop operation from up to 1000 ft (304.8 m) away. Uses 16 ga, multi-stranded, dual conductor. Low-voltage wire (RB509).
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Ghost Controls AXPB Push Button, Non-Illuminated, Plastic, Black
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
The Ghost Controls push-button is a simple switch to operate the gate. This non-illuminated button easily connects with two wires to the main system controller to allow you to open, stop or close the gate opener. Requires low voltage wire to be purchased separately for installation.
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Ghost Controls AXLC Clevis Pin, Locking
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
This locking solid-steel clevis pin is designed to replace the standard clevis pin included in all ghost controls automatic gate opener kits. This locking pin allows any padlock with a shank up to 8 mm in diameter to be used to secure your automatic gate opener to the rear post mount. This is the same pin that is included in the ax2l and ax3l security kits.
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Ghost Controls AXPO Bracket Kit, Steel
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
The push-to-open adapter bracket kit includes two pivot brackets for the rear mount to use when installing a Ghost Controls gate opener system on a push-to-open application. Push-to-open applications are less commonly installed and require this additional hardware for proper clearance of the operator.
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Mighty Mule FM133 Security Pin-Lock, Steel
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
The security pin lock helps provide security and peace of mind by preventing a gate opener arm from being removed or stolen and allowing unwanted access to the property. The pin lock substitutes for the clevis pin at the front end mount of all models of Mighty Mule swing gate openers and it does not allow the clevis pin to be removed from the gate without a key to the lock.
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Mighty Mule FM148 Push to Open Bracket, Metal, For: Mighty Mule FM500/502, 600 and 350/352 Automatic Gate Openers
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
The push-to-open bracket is an 11 in metal bracket that connects the gate opener to the gate post at an angle that allows the gate to swing away from the property, instead of into it. The FM148 is compatible with the Mighty Mule FM500/502, 600 & 350/352 automatic gate openers. This feature is useful on sloping driveways or where space prevents a gate from opening inward. Two-brackets are needed for dual gate installations.
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Mighty Mule MMT103 Door Opener
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
Mighty Mule Door Opener, ABS, Includes: Battery
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Ghost Controls AXBT Battery, 12 V Battery, Lead-Acid
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
The GHOST CONTROLS 12 V 7 A hour battery is designed for use in GHOST CONTROLS and other gate opener systems that utilize an internal battery design within the battery.
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Ghost Controls AXTB Tube Bracket Kit, Steel
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
The Ghost Controls universal tube bracket kit is an ideal solution for easily mounting your gate opener front mount, AXZL ZombieLock or a variety of other things to a tubular or chain link gate or fence.
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
|
|
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |
Mighty Mule FM150 Replacement Battery, Replacement, For: FM500, FM502 and PRO Models Gate Opener
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif)
This 12 V, 7.0 Ah, maintenance-free battery is the replacement or 2nd back-up battery for the FM500/FM502 Mighty Mule gate openers.
|
|
![](v/vspfiles/templates/132/images/clear1x1.gif) |