|
|
|
|
|
|
Toolpro 5010 Eye Lag Screw, Carbon Steel, Zinc
|
|
|
Eye lag screws are specifically designed for attaching ceiling grid hanger wire to any wood overhead. The hanger wire is threaded through the eye and twisted off before or after the eye lag screw is installed. Pre-drilling is recommended for the strongest attachment.
|
|
|
|
|
|
|
|
|
|
GRD PUNCH REPAIR KIT F/TP05060
|
|
|
|
|
|
|
|
|
|
|
|
|
Toolpro TP05044 Ceiling Grid Clamp, Plastic
|
|
|
Lever action grid clamps temporarily connect ceiling grid and firmly hold leveling line during the layout process. Each clamp is made from spring steel and is easy to operate with a single hand. Rubber tips on the clamps hold the grid and leveling line firmly in place without damaging the grid finish.
|
|
|
|
|
|
|
|
|
|
Toolpro TP05032 Eye Lag Driver
|
|
|
This heavy-duty tool easily installs eye lag screws up to 4-1/2 in. long as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver.
|
|
|
|
|
|
|
|
|
|
|
DISPLAY HANGER F/1IN CEIL GRID
|
|
|
|
|
|
|
|
|
|
|
|
|
Toolpro TP05110 Edge Cutter, Steel
|
|
|
The Shadowline cutter creates ideal Shadowline or reveal edges on ceiling tiles and acoustical panels. The one-piece all-steel design is comfortable to hold and use. This contractor-proven tool will not only make the most professional looking cuts possible. It will pay for itself on the first day by eliminating wasted tiles due to bad cuts. Blade changes and cutting depth are easily adjusted by hand with no additional tools required.
|
|
|
|
|
|
|
|
|
|
|
SPRING CLAMP STL NIC PLT 4X1IN
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CEILING PANEL HLDDWN CLIP STL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
JET LINE HI-VIS ORANGE 450FT
|
|
|
|
|
|
|
|
|
|
|
|
|
Toolpro 05015 Eye Lag Screw, 3 in L, Carbon Steel, Zinc, 100
|
|
|
Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. Pre-drilling is recommended for the strongest attachment.
|
|
|
|
